SZ1-K (AS+) 0.6/1kV

Application and Description

These cables are specially designed to transmit electric power in the extreme conditions that there are in a large fire, assuring electric supply to emergency circuits, like signaling light, fume extractors, acustic alarms, water pumps, etc. In case of fire, they do not emit toxic or corrosive gases, thereby protecting public health and avoiding any possible damage to electronic in public places such as: hospitals, schools, museums, airport, bus terminals, shops in general, tunnels, the underground, etc., as well as in calculation centres, offices, production plants, laboratories, etc.

Standard and Approval

UNE 211025, IEC 60502, EN 60332-1, EN 50266, EN 50267-1, EN 50267-2, EN 61034, IEC 60332-1, IEC 60332-3, IEC 60754-1, IEC 60754-2, IEC 61034, IEC 60331

Cable Construction

- Flexible electrolytic annealed copper conductor
- Class 5 in accordance with IEC 60228.
- Silicone insulation, type EI2, according to UN-EN 50363.
- Color coded to HD 308
- Thermoplastic polyolefin outer sheath according to UNE 21123

Industrial Cables SZ1-K Industrial Cables SZ1-K

Technical Characteristics

- Working voltage: 600/1000 volts
- Test voltage: 2000 volts
- Minimum bending radius: 5 x O
- Working temperature: -15o C to +90o C
- Short circuit temperature: +250o C
- Insulation resistance: 20 MΩ x km
- Halogen free: IEC 60754-1, EN 50267-2-1
- No corrosive gases: IEC 60754-2, EN 50267-2-2
- Low smoke density: IEC 61034, EN 50268-2
- Flame retardant: IEC 60332-1, EN 50265-2-1
- Non-flame propagating: IEC 60332-3, EN 50266-2

Cable Parameter

AWG NO. OF CORES X
NOMINAL CROSS
SECTIONAL AREA
# X MM^2
NOMINAL
OVERALL DIAMETERMM
NOMINAL WEIGHTKG/KM AWG NO. OF CORES X
NOMINAL CROSS
SECTIONAL AREA
# X MM^2
NOMINAL
OVERALL DIAMETERMM
NOMINAL WEIGHTKG/KM
14(50/30) 1×2.5 6.5 70 12(56/28) 3G4 13.2 255
12(56/28) 1×4 7.3 90 10(84/28) 3G6 14.4 370
10(84/28) 1×6 7.8 115 8(80/26) 3G10 16.5 530
8(80/26) 1×10 8.8 165 6(128/26) 3G16 18.6 740
6(128/26) 1×16 9.9 225 6(128/26) 3×16 18.6 740
4(200/26) 1×25 11.0 310 4(200/26) 3×25 23.4 1040
2 (280/26) 1×35 12.2 410 12(56/28) 3G4 13.2 255
1(400/26) 1×50 13.6 550 16(30/30) 4G1.5 11.1 170
2/0(356/24) 1×70 15.7 760 14(50/30) 4G2.5 12.6 230
3/0(485/24) 1×95 17.5 980 12(56/28) 4G4 14.4 315
4/0(614/24) 1×120 19.5 1235 10(84/28) 4G6 15.7 450
300 MCM
(765/24)
1×150 21.5 1530 8(80/26) 4G10 18.0 660
350 MCM
(944/24)
1×185 23.4 1835 6(128/26) 4G16 20.4 925
500MCM
(1225/24)
1×240 26.6 2495 6(128/26) 4×16 20.4 925
- 1×300 30.2 2895 4(200/26) 4×25 23,4 1310
- 1×400 34.8 3935 2(280/26) 4×50 30.0 2375
16(30/30) 2×1.5 9.8 140 8(80/26) 5G1.5 12.1 205
14(50/30) 2×2.5 11.1 185 14(50/30) 5G2.5 13.7 285
12(56/28) 2×4 12.5 245 12(56/28) 5G4 15.7 390
10(84/28) 2×6 13.6 305 10(84/28) 5G6 17.2 555
8(80/26) 2×10 15.5 430 8(80/26) 5G10 19.8 815
6(128/26) 2×16 17.5 585 6(128/26) 5G16 22.5 1140
4(200/26) 2×25 20.0 810 4(200/26) 5G25 25.9 1620
16(30/30) 3G1.5 10.3 140 2 (280/26) 5×35 27.4 1960
14(50/30) 3G2.5 11.7 190 1(400/26) 5×50 33.5 2885